AI features built into PCBEditor

From a plain-English description to a fab-ready board — every step has AI assistance you can lean on, or override.

ai_pcb_routing
AI PCB Routing
Let the AI lay down the copper. Describe the constraints — clearance, layer count, fab profile — and PCBEditor routes traces that pass DRC the first time.
ai_footprint_generator
AI Footprint Generator
Upload a datasheet or paste a part number. Get a manufacturer-accurate footprint with pads, courtyard, and silkscreen — ready to drop into your board.
esp8266_schematics
ESP8266 Schematic Generator
Tell PCBEditor what you're building with an ESP8266 — sensor logger, WiFi switch, IoT relay — and get a complete, verified schematic in minutes.
ai_pick_and_place
AI Pick & Place
Decoupling caps next to the pins they decouple. Signal flow left to right. Thermal islands away from sensitive analog. PCBEditor's placement AI works the way an engineer does.
generative_wiring
Generative Wiring
Stop drawing nets one at a time. Describe what the circuit does and PCBEditor generates the wiring — power, signal, ground — verified against the parts you've chosen.
ai_pcb_editing
AI PCB Editing
Move a connector, widen the power traces, add a bypass capacitor near U1. Say what you want and the board changes. Every edit is scoped, reviewable and undoable.
ai_drc_check
AI DRC Check
A DRC that does more than report. Clearance, annular ring, drill spacing, board-edge and copper-overlap rules are checked, and most violations are corrected algorithmically rather than handed back to you.